Omni Instruments
contact icon+44 (0) 845 9000 601
+44 (0) 1382 443000
WE ARE HERE TO HELP

Contact our technical sales team now to discuss your requirements

help icon
MY BASKET basket arrow

£0.00

My Cart

You have no items in your shopping cart.

Click basket to edit.

Products

Latest added news blog
New MX32 Gas Detection Controller
Richard Burgess
Aug 18,2016
Designed to meet SIL1 requirements, the new MX32 from Tyco is a compact, low-profile gas dete...read more >
CMP11 Pyranometer

CMP11 Pyranometer

4+ Weeks Del.

Quick Overview

The CMP11 Pyranometer is a secondary standard pyranometer based on the proven technology of the previous CM22 pyranometer. The CMP11 uses a 32-junction thermopile detector and provides an expected output of 0-20mV based on a sensitivity of 7 to 14V/W/m. The CMP11 has two, 2mm thick, high quality concentric domes which reduces directional error and improves thermal isolation. The CMP11 also has built-in passive temperature compensation and a refillable desiccant chamber. Spectral range of 285 to 2800nm. The CMP11 is an ideal unit for solar tracking applications and as a minimum standard pyranometer for solar PV monitoring systems.
View Options

Details

The housing design of the CMP 11 is fitted with a screw-in drying cartridge that can simply be removed using a coin. This allows the desiccant to be replaced as required using the convenient refill packets. The CMP 11 also features a passive temperature compensation circuit with a standardised linear function.

The CMP 11 has a 32-junction thermopile sensing element, which features faster response, better linearity and a wider measurement range than the CMP 3 and CMP 6.

The integral bubble level is raised to the top of the housing and can be viewed without removing the redesigned snap-on sun shield, which also covers the connector. The connector with gold-plated contacts allows for easy exchange and re-calibration. The drying cartridge is now a screw-in type that can be simply removed using a coin, for changing the desiccant that is supplied in convenient refill packets.

Diagram

Specification

Spectral range: 285 to 2800nm
Sensitivity: 7 to 14µV/W/m²
Response time: <5 s
Zero offset A: <7 Wm²
Zero offset B: <2 Wm²
Directional error (Up to 80º with 1000 Wm² beam): <10 W/m²
Temperature dependence of sensitivity (-10 to +40ºC): <1 %
Operating temperature range: -40 to +80°C
Maximum solar irradiance: 4000 W/m²
Field of view: 180°

Availability: Stock Item

 

Components / Downloads

For further information, technical advice, or a quotation please call or email us. If you are not sure which product you need one of our technical sales advisors will be happy to discuss your application. We also accept company purchase orders by fax or post. Credit card orders can also be placed over the phone for any product.

REF DESCRIPTION DOWNLOADS PRICE ORDER ITEM
 
CMP11 Secondary Standard Pyranometer.
0362910-000
0362910-000
CMP 11 Secondary Standard Pyranometer. Two, 2mm thick, high quality concentric domes. Integrated leveling. Sun shield. Spectral range 285-2800nm, response time less than 5 sec (95%), Operating temperature -40 to +80°C. Thermopile detector. Sensitivity 7 to 14µV/Wm². Supplied with no plug or cable.
View FileDatasheet
   Size: (1.1 MB)
£1,869.00
or call us for a quote
0362910-002
0362910-002
CMP 11 Secondary Standard Pyranometer. Two, 2mm thick, high quality concentric domes. Integrated leveling. Sun shield. Spectral range 285-2800nm, response time less than 5 sec (95%), Operating temperature -40 to +80°C. Thermopile detector. Sensitivity 7 to 14µV/Wm². Supplied with waterproof 2-pin plug connector with 10m of pre-wired yellow signal cable.
£1,948.00
or call us for a quote
 
CMP Series Pyranometer Connection Options
2523144
Waterproof 2-pin plug connector for CMP Series Pyranometer and CUV5 Radiometer. Requires customers own cable wiring.
£15.00
or call us for a quote
0362601
Waterproof 2-pin plug connector with 10m of pre-wired high quality yellow signal cable with 2 wires and a shield covered with black sleeve for CMP Series Pyranometer and CUV5 Radiometers
£105.33
or call us for a quote
0362603
Waterproof 2-pin plug connector with 25m of pre-wired high quality yellow signal cable with 2 wires and a shield covered with black sleeve for CMP Series Pyranometer and CUV5 Radiometers
£174.00
or call us for a quote
0362604
Waterproof 2-pin plug connector with 50m of pre-wired high quality yellow signal cable with 2 wires and a shield covered with black sleeve for CMP Series Pyranometer and CUV5 Radiometers
£331.00
or call us for a quote
0362605
Waterproof 2-pin plug connector with 100m of pre-wired high quality yellow signal cable with 2 wires and a shield covered with black sleeve for CMP Series Pyranometer and CUV5 Radiometers
£646.00
or call us for a quote
 
CVF 4 Ventilation Unit
0378900-000
0378900-000
CVF 4 Ventilation unit designed to provide clean air-flow over the dome or window to minimise the formation of dew and reduce the frequency of dome cleaning. Replaceable fan inlet filter. Power Supply 8-13.5vDC (5W continuously at 12vDC, 5.5W with heater) Operating temperature range -40 to +70°C. Waterproof connector, supplied without plug or cable. Suitable for Kipp & Zonen CMP & SMP series pyranometers and CUV5 & UVS radiometers.
£909.00
or call us for a quote
 
Connection Options for CMP Pyranometers, CGR3 (10K), CGR4 (10K), CVF4 & CNF4 Ventiliation units.
2523145
Waterproof 4-pin plug connector for the following Kipp & Zonen equipment. CMP Series pyranometers, CGR3 & CGR4 pyrgeometers and CVF4 & CNF4 ventilation units. Requires customers own cable wiring.
£20.00
or call us for a quote
0362611
Waterproof 4-pin plug connector with 10m of pre-wired high quality yellow signal cable with 4 wires and a shield covered with black sleeve. Suitable for the following Kipp & Zonen equipment. CMP Series pyranometers, CGR3 & CGR4 pyrgeometers and CVF4 & CNF4 ventilation units.
£84.00
or call us for a quote
0362613
Waterproof 4-pin plug connector with 25m of pre-wired high quality yellow signal cable with 4 wires and a shield covered with black sleeve. Suitable for the following Kipp & Zonen equipment. CMP Series pyranometers, CGR3 & CGR4 pyrgeometers and CVF4 & CNF4 ventilation units.
£179.00
or call us for a quote
0362614
Waterproof 4-pin plug connector with 50m of pre-wired high quality yellow signal cable with 4 wires and a shield covered with black sleeve. Suitable for the following Kipp & Zonen equipment. CMP Series pyranometers, CGR3 & CGR4 pyrgeometers and CVF4 & CNF4 ventilation units.
£336.00
or call us for a quote
0362615
Waterproof 4-pin plug connector with 100m of pre-wired high quality yellow signal cable with 4 wires and a shield covered with black sleeve for CMP Series Pyranometers and Pygeometers with 10K thermistor output.
£651.00
or call us for a quote
 
Mounting Options
0362700
CMF 1 Mounting fixture has a 88mm diameter round plate with a non-removable mounting rod of 16mm diameter and 350mm long. Can be mounted to a pole or wall with the CMB 1 mounting bracket.
£168.00
or call us for a quote
0362703
0362703
CMF 4 Mounting fixture has a 280mm diameter plate with a non-removable mounting rod of 20mm diameter and 350mm long. Can be mounted to a pole or wall with the CMB 1 mounting bracket. Suitable for ventilated radiometers.
£347.00
or call us for a quote
0369701
0369701
CMB 1 Mounting Bracket. This bracket is suitable for various mounting rod sizes, from 12mm to 20mm diameter, and can be secured via u-bolts to masts or poles from 22mm up to 60mm diameter. The bracket can also be secured directly to a wall, or other flat surface.
£205.00
or call us for a quote
 
Enclosure Mounted Amplifier
5331A3B-ENCL
5331A3B programmable transmitter with a 7.2-35vDC power supply. Single channel unit for PT100, thermocouple, Resistance or bi-polar mV input, producing a 2-wire 4-20mA output. 1.5kvAC galvanic isolation. Programmed to suit the connected sensor. Transmitter fitted in weatherproof enclosure with 2 cable glands.
View FileDatasheet
   Size: (245.66 KB)
£254.19
or call us for a quote
 
5114A Programmable Transmitter
5114A-A
Single channel 5114A programmable transmitter. Single channel unit for RTD, TC, mV, linear resistance, mA and V inputs, producing a (0)4-20mA, 0-10vDC output. 3-port 3.75 kVAC galvanic isolation. Can be mounted vertically or horizontally on a DIN rail. Power Supply 21.6 to 253vAC or 19.2 to 300vDC.
View FileDatasheet
   Size: (256.55 KB)
£227.64
or call us for a quote
SOLAR-CONFIG
Complete programming and configuration of programmable amplifiers to client specifications. Standard input ranges would be 0-1600Wm² or 0-3200µmol/m²s depending on the attached solar instrument.
£15.00
or call us for a quote