Panel mount and DIN rail mount multifunction KWh & power meters suitable for monitoring phase-phase voltage, phase to neutral voltage, phase current, frequency, active power, reactive power, apparent power, active energy, reactive energy, power factor, instantaneous demand amps, instantaneous demand active power, instantaneous demand apparent power, max demand amps, max. demand active power and max. demand apparent power.
QI Single Phase Power & Energy Meter
Compact CT sized power meter that offers a huge number of measurements including THD, Watt, VA, VAR, kW/h, Min/Max RMS plus many more. Ranges up too 1000V and 400A and frequency from 1Hz to 400Hz with a 0.5% accuracy. Fast 11k Hz sampling rate capable of capturing spikes in your power line. MODBUS RTU output with over 200 registers of data.
Price range : £65.00 - £80.00
Conto D4-Sh - Multifunction Power Meters
The D4-SH multifunction power meter is suitable for monitoring single and three phase supplies for current, phase to phase and phase to neutral voltage and kWh consumption. It offers a pulse output for kWh measurement or Modbus RS485
Price range : £19.23 - £116.91
1 Week Del.
Conto D4-Pt MID Approved Energy Meter
The Conto D4-Pt is a static meter with MID certification suitable for sub-metering applications. Suitable for 3 phase 4 wire networks up to 400V, 5A. It offers a pulse output for kWh measurement or Modbus RS485 plus an 8 digit LCD.
Price range : £19.23 - £183.47
Conto D4-Pd kWh Meter
The Conto D4-Pd can be used for single phase or three phase direct input, up to 63 amps. It is available with pulsed output for kWh or Modbus RS485
Price range : £135.68 - £160.18
2-3 Days Del.
Direct Input Multifunction Energy Meter
A low cost DIN rail mounting multifunction energy meters with direct mains electricity input (no CT required) for single phase supplies up to 80A. The meter features a backlit LCD display and an RS485 Modbus output. The Modbus output can be connected to a wide range of Omni Instruments data loggers and remote data acquistion units.
Price range : £31.50 - £31.50
2-3 Days Del.
Direct Input MID Approved KWh Meters
A low cost DIN rail mounting MID approved kWh meters with direct mains electricity input (no CT required). Ranges 0-45 or 0-100 amps. The Pulse output can be connected to a wide range of Omni Instruments data loggers and remote data acquisition units (GPRS, and SMS). The PRO1D-MID & PRO75D-MID units are MID certified, suitable for billing purposes.
Price range : £32.80 - £97.56
2-3 Days Del.
ND-350 Multifunction Meter
The ND-350 is a DIN Rail mounted Electronic Multifunction Power Meter. Suitable for both 3 wire and 4 wire 3f unbalanced loads, these Meters have been designed to measure accurately irrespective of the type of load ideal for a motor or heater, or for a modern electronically controlled load. Available with Pulse and RS485 Modbus RTU outputs.
Price range : £160.00 - £160.00
Nemo 96 HD Multifunction Power Meters
The Nemo 96 HD is a multifunction power meter designed as a panel mounted meter with plug in modules for different communication outputs. Output modules include RS485 (Modbus/JBus RTU protocols), RS232, Pulse Output, 4-20mA, SPST Relays, M-Bus and Profibus protocols.
Price range : £160.65 - £160.65
Nemo D4-DC Multi-Function DC Power Meter
The Nemo D4-DC is a multi-function power meter designed for monitoring DC power supplies. Voltage input 10-300vDC and direct current of up to 10A. Higher ranges available using external adapters and DC current Shunts. Output has two alarm relay outputs, pulse output or RS485 Communications.
Price range : £212.88 - £239.30
DBP Series Split Core Current Transformers.
A range of split core transformers designed for installation into existing plants where removal of busbars/cable lugs prevent installation of standard current transformers. Suitable for monitoring single phases and can be used with the Conto D4, ADM and PRO range of Energy Meters.
Price range : £19.23 - £66.64
2-3 Days Del.