  
The Testo 318 -TestoView
Get the inside picture without taking it apart! The remarkable testo 318
series Fiberscope, gives you the inside edge on diagnosing hundreds of
maintenance and repair problems.
The revolutionary flexible shaft adjusts into almost any position.
The comfort grip handle allows one hand operation, with all the TestoView
controls at your finger tips.
Available in 2 lengths: 914mm & 457mm
Integrated focus ring - ensures continuous operation while focusing.
High powered lens clearly focuses on objects as close as 19mm
Powerful halogen light illuminates dark areas.
High impact housing
Waterproof - lens and shaft can be immersed in liquids.
Optional 'clip-on' 45 degree mirror
Optional 'clip-on' Magnetic tip
Budget Price £250 (457mm) £330 (914mm) |
Testo 318
Data Sheet
|
  |
The Testo 608- H1 & H2
Monitors ambient conditions and dew point in garden centres, storage and
clean rooms, museums laboratories. Stand alone or attachable.
The affordable standard testo 608-H1 hygrometer for continous measurement
of humidity, temperature and dew point.
The accurate testo 608-H2 alarm hygrometer with an accuracy of ±
2% and LED alarm function reliably warns you if limits have been exceeded.
Budget Price 608-H1 £38 & 608-H2
£67 |
|
|
|
The robust one-hand thermometer for quick spot checks on food
The Testo 105, the penetration thermometer with display, ideal
for the food sector. Regular temperature monitoring during the storage, transport and handling
of food is necessary and is required by law.
Testo 105, the probe thermometer for quick spot checks at critical points
in accordance with HACCP guidelines on food hygiene. Testo 105-2 model
available with corkscrew design to test frozen food.
Budget Price £38 |
|
|
 |
The Testo 106-T1/T2 penetration thermometers are ideally suited
for quick and easy core temperature checks in all sections of the food
industry.
The practical and compact thermometer is always close at hand, fitting
a breast pocket comfortably. It is also suitable for measurements on small
food products on account of its thin and robust measuring tip.
Budget Price From £24 |
|
|
 |
The Testo 110 is a
highly accurate thermometer covering the range from -50 to +150 °C
(-60 to +300 °F).
The robust, water resistant design of the instrument makes it ideal
for applications in the food industry and laboratories.
Budget Price From £84
|
|
|
 |
The Testo 720- The accurate Pt100 measuring instrument comes with
4 wire sensor technology. Due to its rugged, water resistant design, large
display, and extensive measuring range, Testo 720 is the ideal instrument
for everyday measurements in industry. The newly-developed glass-coated
laboratory probe with replaceable glass tube can be used for applications
in
corrosive atmospheres. The cork screw probe facilitates temperature monitoring
in frozen food.
Budget Price from £168 |
|
|
 |
The Testo 905-T1 is one of the fastest mini thermometers available
- with a wide measuring range from -50 to +350°C short-term (1-2 minutes)
up to +500°C.
The sensor, type K thermocouple, is ideal for super-quick measured results
in liquids, air and in soft or powdery substances.
Particularly in the top measuring range, the Testo 905-T1 is much more
accurate than most thermometers in this price range.
Budget Price £38 |
|
|
 |
The Testo 905-T2 is our latest innovation.
A surface thermometer of professional quality at a low price.
The sprung-loaded wide thermocouple measuring head, type K, guarantees
a very quick reaction time and a high accuracy level by placing the probe
flat on the uneven object to be measured (surfaces).
Budget Price £53 |
|
|
 |
The Testo 915-1 is related to the versatile testo 925!
The compact measuring instrument has many advantages such as a large display,
HOLD button and high accuracy. The penetration probe is permanently attached
to the measuring instrument. The "Topsafe" case protects the instrument
from dust, dirt, and water. The probe is particularly suitable for immersion
and penetration measurements in industry or in the food sector.
Budget Price £65 |
|
|
 |
Testo 922
The Testo 922 measures the temperatures of two connected probes simultaneously
and displays the differential temperature.
The affordable differential thermometer is ideal for use by heating and
air conditioning technicians and fitters.
Applications:-Flow and return checks in heating systems, Servicing on
HVAC systems, Tests heat exchangers
Budget Price £75 |
|
Testo 922
Data Sheet
|
 |
The handy Testo 925 measuring instrument is the all-round partner
for tough temperature measurement applications. A wide selection of probes allow use for every application.
Applications: Quick temperature measurements for tough applications in
industry
Budget Price £55 |
|
|
 |
Testo 926
The quick and robust Testo 926 is the ideal partner for tough applications
when taking daily temperature measurements in the food industry.
Quick and accurate results are guaranteed when type 'T' thermocouples
are used.
TopSafe, the indestructible case protects the Testo 926 for dirt, water
and shock.
TopSafe is dishwasher-proof.
The wide range of probes enables measurements in a wide variety of applications.
Budget Price £84 |
|
Testo
926 Data Sheet
|
 |
Testo 935
The Testo 935 measures the temperatures of two connected probes simultaneously
and displays the differential temperature.
The affordable differential thermometer is ideal for use by heating and
air conditioning technicians and fitters. Data can be printed on
location via a infra-red printer.
Features:- 2 Channels, Type K/J/T, Display for T1, T2, and differential
temperature. TopSafe, Indestructible case, protects from dirt and impact. HOLD/MAX/MIN
Budget Price £174 |
|
Testo 935
Data Sheet
|
  |
The Testo 946 monitors and documents temperature values during
the production, storage, delivery or distribution of food; with proof
available for food inspectors. The data measured can be saved according
to product and analysed on your PC, or it can be printed on location on
the Testo log printer. An alarm limit value (acoustic and optical) can
be saved for each product.
Budget Price £298 |
|
|
 |
The Testo 950:- Accurate temperature measurements are becoming
increasingly important, especially in regarding energy savings, indoor
air quality and environmental protection. Limitless future options available with the 950 modular system.
This modular system approach allows you to purchase the instrument
that currently meets your measuring requirements, yet is capable of being
upgraded at a later time for your future measuring needs. In this way, you can add humidity and/or velocity measuring to the meter
when you want. These meters are supported with our user-friendly, Basic Comfort software, which can
be used for programming, data processing, and even bar-coding
Budget Price from £602 |
|
|
 |
The Testo 825-T1/T2 are universal, quick action infrared thermometers
with a measuring range of -50 to +400°C for applications in industry
and trade. The supplied TopSafe case protects the instrument from dust, impact and
water. Applications:Checks suface temperatures, e.g. on transformer windings. Checks heat sink temperatures, Measures temperatures of car radiators.
Checks bearing temperatures of bearings and gears. Measurements on live electrical parts.
Budget Price From £71 |
|
|
 |
The Testo 825-T3 and 825-T4 are non-contact infrared thermometers
and contact thermometers in one compact instrument. You can measure the
temperature on rotating, inaccessible or live objects conveniently and
safely using the infrared side of this multi-function measuring instrument.
The contact side is equipped with the super-quick, Testo sprung thermocouple.
Reliable and accurate measurements are possible in uneven surfaces.
As the Testo 825-T1/T2, but also features a contact surface probe for
ultimate flexibility in temperature measurement.
Budget Price From £127 |
|
|
 |
Testo 826-T1/T2
The Testo 826-T1 and 826-T2 for non-contact and screening tests on food.
Non- Contact screening tests on food can be carried out quickly and efficiently
with this new instrument. Wider Measuring range (-50 to +400°C).You
can carry out the legally required checks on your food convieniently and
without damaging the packaging. The adjustable alarm indicates immediately
if a value has been exceeded. The TopSafe dishwasher proof protective
case guarantees the hygene of the instrument
Budget Price From £71 |
|
|
 |
The Testo 826-T3 and 826-T4 for non-contact and screening tests
on food with the facility to take core temperature readings with the built-in
penetration probe. It is even possible to take the temperature of frozen
goods with the supplied frozen food pre-borer. Fast action and efficiency
combined in one practical instrument.
As the Testo 826-T1/T2, but also features a penetration probe for quick
and accurate core temperature measurements within the food industry.
Budget Price From £119 |
|
|
 |
A one-piece measuring instrument for non-contact temperature measurement.
Available with LED or laser sighting. Range: -50° to 500°C (-58°
to 932°F
You can choose from 2 infrared measuring instruments for non-contact temperature
measurement.
Quicktemp 850-1
Optical LED sighting at short distance from the object to be measured
Small spot with a 0.1" diameter at a distance of 1.2"
Quicktemp 850-2
Optical laser sighting at long distance from the object to be measured
Measuring spot with a 2.8" diameter at a distance of 39.4"
Budget Price From £425 |
|
|
 |
Testo 860-T1/T2/T3
Quicktemp 860-T1/-T2/-T3. Non- Contact temperature measurement featuring
new laser technology and wide measuring range (-30 to +900°C). It
features a 16 point laser sighting circle with a centre aiming point which
defines the area you are measuring. Incorrect measurements are now a thing
of the past.
Long Distance measurements are also possible thanks to the 60:1 focus.
The display automatically charts the last ten temperature points using
maximum and minimum values to establish the range.
There are three variants of this instrument to choose from.
Budget Price From £499 |
|
|
|
Testo 545
Measuring Luminous intensity with mean calculation, memory and location
management.
In order to have good quality light, the luminous intensity in places
of work, hospitals, offices or schools has to fulfil specific minimum
values. This can be measured and documented efficiently using the testo
545
Budget price £235 |
|
Testo 545
Datasheet
|
 |
Accurate measurement of sound
The Testo 815 and 816 are portable instruments for accurate sound
level
measurement. The Testo 816 is the same as the 815 except it has a greater
accuracy.
The low-cost measuring instrument for...
Monitoring environmental noise levels
Air conditioning and ventilation plant noise levels
Complying with the Health and Safety at Work Act.
Factory machine noise levels
Office noises, photocopiers, printers
Budget Price From £324 |
|
|
 |
Testo 535 The ideal CO2 measuring instrument for building engineers. Bad air quality
in enclosed rooms which is caused by a too high CO2 concentration (> 1000
ppm) can lead to tiredness lack of concentration and even to illness (sick
building syndrome SBS.)
The advantages at a glance.
Long-term monitoring using maximum value and mean calculation, 2 channel
infrared sensor, Long-term stability, High accuracy, Highly reliable,
Repeated adjustment unnecessary.
Budget Price £337 |
|
Testo 535
Data Sheet
|
 |
Testo 315-1
Safety during monitoring and adjustment of gas heating systems
By measuring the CO level, you can protect yourself from poisoning caused
by flue gas escaping into the ambient air. Accurate measurement of gas
pressure, ionisation current and temperature with one practical instrument
ensures safe conditions for you when monitoring and adjusting gas heating
systems.
Applications:- Parallel measurement of safe CO level, Monitors gas flow
pressure
Monitors flue draught limit value, Monitors flame in combustion chamber
Fine adjustment of heating systems (differential temperature measurement)
Budget Price £362 |
|
Testo
315-l Data Sheet
|
 |
Testo 316-1
Detects gas leaks in heating systems
Gas pipelines can leak which means there is risk of explosion! The Testo
316-1 gas leak detection instrument detects even the smallest leaks. The
gas leak detection probe, with its extremely quick reaction time, recognises
if concentrations are too high and an optical and acoustic alarm signal
sounds.
Budget Price from £130 |
|
|
 |
Testo 317-1
Electronic Dew Mirror For The Detection Of Leaking Flue Gases
The electronic dew mirror quickly and efficiently detects escaping heating
flue gases.
Depending on the type of gas burner, flue gases may escape as a result
of dirt or restrictions in the flue gas paths caused by e.g. wear in the
nozzles, underloading or overloading of burner, material fatigue.
There must be a functional fault if gas escapes from the burner and the
presence of CO must be assumed. The blockage in the flue is detected by
the Testo 317-1 electronic dew mirror, an audible and visual alarm is
triggered.
The flexible probe is particularly suitable for areas which are difficult
to access for checking purposes.
Budget Price fro. £46 |
|
|
 |
Testo 325 - Low Cost,Flue Gas Analyser,Quality from a market leader
Testo’s electronic flue gas analysers have been used successfully over
the last 20 years for domestic, commercial and industrial applications.
With the testo 325 we are offering a low cost start in professional flue
gas analysis instrumentation. The testo 325 is the only analyser on the
market independently tested and certified to British Standard for Flue
Gas Analysers by Sira. Conforms to BS7927
Low Cost – Quick – Easy to Use
Testo 325 are ideal instruments for quick and accurate adjustment of burners.
Measures all important parameters with one instrument, including differential
temperature and gas pressure.
Budget Price From £280 |
|
|
 |
Testo 325-1
Easy, accurate and affordable measurement and documentation or industrial
flue gas.
The Testo 325-1 is your instroduction to affordable flue gas measurement
for SO2, NO or CO. It combines precision with user-friendly operation
and low costs. It is the ideal partner for checking emissions and monitoring
thermal processes.
Budget Price From £323.00 |
|
Testo
325-1 Datasheet
|
 |
The Testo Smoke Tester
The testo smoke tester is designed for measuring soot in flue gases. Gases
are drawn from the flue using the pump; the sample is drawn against a
filter paper, where the soot will impregnate the paper. The soot
colour is then compared to a chart provided to give a soot number.
The testo smoke tester is robust, easy to use and good value!
Budget Price From £75 |
|
|
 |
The Testo 300 series
The testo 300 enables the accurate measurement and control of flue gas,
temperature, ambient temperature, oxygen content, C02 and CO content,
draught, excess air and efficiency in seconds. It sets the standard for
advanced compact flue gas analysis with an impressive array of standard
features and valuable options. Two models are offered, the testo 300M
(basic) and testo 300XL (advanced).
Budget Prices From £683 (300M) |
|
|
 |
Testo 300M-I & 300XL-I
The testo 300M-I/XL-I industrial flue gas analyser combines the accuracy
and efficiency of a larger measuring system with the ease of operation
plus low maintenance costs of a smaller analyser.
The Affordable Multi-Function Analysers For Industrial Flue Gases.
Quick flue gas checks are of interest to all people associated with industrial
burners. The new testo 300 M-I/XL-I flue gas analyser combines the accuracy
and efficiency of large measuring systems with easy operation and low
purchasing and maintenance costs. It is the ideal partner for adjusting
burners, emission checks and checking the atmosphere in the production
process.
Budget Prices From £600 (300M-I) |
|
|
 |
Testo 300 XXL
Multi-function flue gas analyser
testo 300 XXL hand-held analyser for measurements on heating systems.
The advantages at a glance :-Integrated printer for documenting readings
on-site
8 user defined function buttons (4 virtual), Integrated differential pressure
measurement
User defined probe socket, RS232 interface, data exchange with Testo or
branch software |
|
|
 |
Testo 360-1 Official measurement results are now portable
The ideal instrument for measuring the emissions in industrial burners
is a compact, versatile instrument. All of the important parameters as
well as gas dehumidification are accommodated in one housing. It is so
compact, it can be easily transported in a car. All of these features
save you money when compared to transport by truck and the long downtimes
of stationary units. The instrument with accessories is so light, it can
be carried and operated by one person. It is so small, even practically
inaccessible measurement points can be reached without any problems saving
unnecessary work and time. In spite of its compactness, it still has upgrade
options for future measurement tasks. The ideal measuring instrument fulfills
requirements which were previously impossible; it is portable, robust
and flexible. It is easy to use and highly accurate. There is now a measuring
instrument which meets all your demands: testo 360 |
|
|
|
The Testo 240 is a complete conductivity measuring instrument as
well as an accurate thermometer.
Advantages: User friendly. Covers very wide measuring ranges with
only one measuring cell. mS/cm and °C via one plug-in connection. Robust and splash-proof (IP54).
Large Display. Measurement of salt content. Extremely long electrode lifetime
due to the 4-pole electrode technology used.
Budget Price £285 |
|
|
|
The testo 445 multi-function
VAC service instrument; measures temperature, relative humidity,
dew point, absolute humidity, degree of humidity, enthalpy, all types
of air velocity (in ducts, duct openings or in extractors), pressure
and indoor air quality.
Budget Price from £422
|
|
|
 |
Testo Professional Class - The reference measuring instruments
The Testo 400 is a multi-function instrument designed to simplify
measuring tasks for professionals and tradesmen. The testo 400 measures
and records:
Temperature with accuracy to <0.1 °C/°F. Probes have calibration
for adjustment capabilities. Humidity/Dew point, complete Mollier diagram values. CO and CO2 with ambient
levels pressure, differential pressure and also absolute pressure.
Velocity measurements using thermal, vane and pitot tube probes. It also calculates volume flow, max, min and values mention of ASHRAE
Speck's. The mV/mA measurement input easily checks transducers outputs.
Logs data with date, time and location over long time periods using the
logger function in the measuring instrument.
Budget Price £795 |
|
|
 |
The Testo 454 is the system for flexible
measurement of several measurement data. Advantages include:
Simultaneous measurement at several measuring points
Freely assignable probe sockets
1 to more than 100 measurement channels
Data transmission via testo data bus or cordless via radio control
Modular layout of system components
A compact hand-held measuring system as basic system
More than 200 standard probes available. |
|
|
|
Testo 312-1, Testo 312-2, & Testo 312-3
Compact DVGW approved pressure gauges for gas systems.
The new Testo 312 pressure gauges are practical electronic alternatives
to manual
instruments for testing gas tightness.
Budget price from £160.00 |
|
Testo 312
Series Datasheet
|
 |
Testo 505
The testo 505-P1/P2, the electronic pressure cell which measures and displays
differential pressures at up to 130 mbar.
The advantages: Small and compact, pocket-size - Fits inside every toolbox
,Integrated magnetic holder, One touch zero, mbar, mmH2O,mmHg Units, Easy
to operate and to change batteries
Auto/OFF function
Budget Price £72 |
|
|
 |
Testo 510
Low cost differential pressure measurement, in a handy size
Differential pressures of up to 130 mbar can be measured using the Testo
510.
The advantages:
Easy switching of mbar, mmH2O, mmHg (inch H2O, psi)
One touch zero
Auto/OFF function
TopSafe protects instrument from dust, dirt and impact
Budget Price £96 |
|
|
 |
Testo 512
Simultaneous pressure and velocity measurement in one instrument.
When connected to a pitot tube, the Testo 512 displays pressure at up
to 200hPa/mbar as well as air velocity. The TopSafe case (optional) protects
the instrument from dust, dirt and impact.
Budget price from £219 |
|
Testo 512
Data Sheet
|
 |
Testo 520
The robust, accurate industrial differential pressure measuring instrument.
Available in measuring ranges:
0 to 20/200 mbar/hPa
0 to 100/1000 mbar/hPa
0 to 200/2000 mbar/ hPa
0 to 1/10 b
Budget Price £278
|
|
|
 |
Testo 525
The highly accurate differential pressure meter for the professional in
industry
The highly accurate testo 525 pressure meter has all the functions expected
by a pressure engineering professional from this range. Measurements in
positive/negative and differential pressure range are possible.
The advantages at a glance:- Temperature-compensated (temperature fluctuations
do not have any influence on the result), 11 different measurement units
to select from (bar, kPa, hPa, mbar, MPa, mmH2O, mH2O, mmHg, psi, inH2O,
inHg), Measures leak rate (pressure drop over time)
Min/Max value,Hold button/Analog bar display, Data logger for separate
values or measurement series. Memory for 960 values. Memory manual, can
be set in 1 to 60 minute intervals, Configuration modes, One touch zero,
Auto Off/Low Bat display, With precision certificate.
Budget Prices From £418 |
|
|
|
Testo 465
Non-contact rpm measurement
Using testo 465, rpm can be easily measured without contact. Simply attach
a reflector to the object to be measured and then point the visible, red
light beam at the reflector and measure.
The advantages at a glance:- Affordable, Easy one-hand operation,
Saves mean/maximum value (last reading )
Budget Price £115 |
|
|
 |
Testo 470
Non-contact and mechanical rpm measurement
testo 470, the ideal combination of optical and mechanical rpm measurement.
An optical measurement becomes a mechanical measurement by simply attaching
an adapter for probe tip or surface speed disc.
The advantages at a glance, Easy one-hand operation
Measurement of rpm, speeds and lengths, "Low Batt" warning
Budget Price £162 |
|
|
 |
Testo 475
Practical mini stroboscope. The testo 475, quick and convenient. Measurements
at inaccessible points are made possible by its practical design and rechargeable
battery operation.
The advantages at a glance
Reflective tape on the measured object is not required
Not necessary to interrupt production
Simultaneous display of rpm and frequency
Mechanical rpm sensor can be connected
Budget Price £491 |
|
|
 |
Testo 415 & 425
The testo 415 is an accurate thermal anemometer covering the velocity
range from 0 to 10 m/s (0 to 2,000 fpm) and the temperature range from
0 to 50 °C (32 to 120 °F).
The testo 425 covers the range from 0 to 20 m/s (0 to 4,000 fpm) and the
temperature range from -20 to 70 °C (-4 to 160 °F).
The compact 415 and 425 use a heated wire NTC sensor to measure velocity
and temperature for applications in the HVAC industry.
Budget price for 415 £255 |
|
Testo
415/425 Data sheet
|
|
The Testo 230 Compact pH/°C Meter
The testo 230 combines a complete pH measuring instrument and a high standard
thermometer in a compact, waterproof housing. The redox voltage
and also be determined by connecting the redox electode type 06.
Budget Price £249 |
|
Testo 230
datasheet
|
