Universal Indicator N480i

This low cost and easy-to-use universal indicator can be programmed by non-experienced users. Full rangeability and a 24Vdc output for remote transmitters are standard.

Universal Indicator N1500

High performance, universal panel mount indicator suitable for a variety of signals and sensors including RTD's, load cells, thermocouples, voltage and current. Large range of output options including relays, analogue retransmission and RS485 for connection to systems supporting the MODBUS protocol. Easy to program via front keypad, ultra bright display and universal switching power supply..

Large Digit Universal Indicator N1500-G

Similar features to the N1500 indicator however with large 56mm, ultra bright LED display. Suitable for applications where the display has to be viewed over a considerable distance.

Price range: £284.25 - £284.25

Temperature Controller N440

The N440 is an ON/OFF action digital temperature controller which provides maximum versatility at an economic price and can be a great substitute for the obsolete analog controllers. It accepts thermocouples type J, K or Pt100 RTD and features one relay and one voltage pulse output. Keypad programming is simple and intuitive and parameters setting can be selectively locked. The N440 is aimed at simple temperature heating or cooling processes applications that require low cost and yet demand good display accuracy with simple operation.

N320 Temperature Indicator

N320 temperature indicator features a large, 3 digit LED display, IP65 front panel protection and an optional RS485 output which supports the MODBUS RTU protocol. Thermistor versions also include temperature sensor with 2 meters of cable.

N321 Electronic Thermostat

The N321 electronic thermostat are used to measure, indicate and control temperature in many different systems. Accepts 4 sensors types: Pt100, Pt1000, NTC or Thermocouple J. The user can program the control action according to the application: direct action (refrigeration) or reverse action (heating). The internal 10A relay can directly switch compressors or electrical heaters with ON/OFF control.

N321R Electronic Thermostat

The N321R is a thermostat dedicated to applications in refrigeration. The defrost cycle is accomplished by turning off the compressor at time intervals chosen by the user. Pt100, Pt1000 and thermistor sensors inputs available. Adjust for ON and OFF durations. Auto defrost at programmable intervals. Manual Defrost key in the front pannel.

N322 Electronic Thermostat

Digital thermostat for heating and refrigeration purposes with 2 independent set-points. It has Pt1000, thermistor NTC, PTC or J thermocouples inputs available

N322T Electronic Thermostat

Electronic thermostat for heating and refrigeration purposes with timer support. It has Pt1000, thermistor NTC, PTC or J thermocouples inputs available. Allows energy time delay and minimum on/off time settings.

Temperature Controller N480-D

The N480D series of PID temperature controllers was designed for non-experienced novice users for combining extreme simplicity in operation with high performance only found in expensive high end controllers. It is a low-cost instrument which can be easily installed and operated. It accepts most thermocoules and Pt100 RTD, features a relay and pulse output for driving solid state relays and optionally can be supplied with a linear 4 to 20 mA output. Autotunig PID function, dual display, full range universal power supply and ramps soak function are standard. It greatly surpasses the old and obsolete analog controllers in performance with ease of operation..

Temperature Controller N960

Great substitute for the old and obsolete analog controllers for holding extreme simplicity in operation and yet featuring the highly accurate performance of digital technology. The 20mm high display can be viewed from far away and the big functional keyboard can be operated by users wearing gloves

Universal Controller N1100

It holds in one single instrument all the major features that are needed for the vast majority of industrial processes. Both input and output are selected through the front keyboard without hardware change.

Universal Controller N2000

The N2000 Universal Process controller is a real breakthrough in versatility for holding in one single instrument all the major features required in the vast majority of industrial processes.

Universal Controller N2000-s

The N2000 Universal Process controller is a real breakthrough in versatility for holding in one single instrument all the major features required in the vast majority of industrial processes.

Universal Controller N3000

N3000 Big Digit Universal Process Controller is a real breakthrough in versatility for holding in one single instrument all the major features required in the vast majority of industrial processes.