( +44 (0) 845 9000 601  

*  info@omniinstruments.co.uk

( +1-866-849-3441  

*  info@omniinstruments.net

( +61 (0)282 442 363  

*  info@omniinstruments.com.au

Radio & GSM Telemetry \ Solar Panels and Wind Generators \ Rutland 910-3 Wind Generator

Product details

The Furlmatic model has a "furling" device that tilts the turbine horizontally at right angles to the prevailing wind at windspeeds above 35mph. This protects the turbine from the forces of excessive winds and reduces stresses on the turbine and tower.
Wherever there is a site that is unattended, remote and exposed the FM910-3 can be relied on. Professional applications such as monitoring, telemetry, communications, isolated agricultural uses, navigation aids, military field applications, rural street lighting, remote homes and many more.

• Furling tail design
• Three phase Rutland "unique" design generator
• Fine profile maximum efficiency aerofoil blades
• Automatic thermostat protection in prolonged gales
• Turbine diameter of 910mm
• Steel components are galvanised and epoxy coated for longevity Simple to install and maintain Designed to mount on standard size tube 61mm outside diameter (available worldwide)

   

• SR200 Regulator - Shunt type regulator prevents battery overcharge
• RWS200 Controller - Incorporates the SR200 Regulator, charge ammeter, dual battery voltage LED's, two battery connection terminals and switch for charging one or two battery banks simultaneously, solar panel input (maximum 50w when used in combination with FM910-3 windcharger). Housed in attractive white case with simple to follow graphics for installation.
• Other System Components
  Batteries, tower, cable & connectors

Other System Components:

• Batteries - We recommend deep cycle lead acid batteries, sealed or non-sealed, of a minimum capacity of 75AH @ 12V / 24V
• Cable - Cable thickness depends on the overall length used between the wind generator, regulator and battery. For distances up to 20m a cable thickness of 2.5mm is recommended. The regulator should always be sited within 1.5m of the battery to minimise voltage losses and ensure accuracy of battery regulation.
• Mounting pole for land based systems -the 910-3 can be installed on land using a 6m length of 61mm outside diameter tube. The mounting pole can be fixed into the ground or on pivot type base. A minimum height of 6m and of 4 guy wires is recommended. More details are given in the installation manual.

Components / Downloads