Flow Meters \ Ultrasonic Flowmeters - Fixed - Time of Flight and Doppler \ OMNI-TUF-200F Wall Mount Ultrasonic Flowmeter

Product details

OMNI-TUF-200F Wall Mount Ultrasonic Flowmeter supplied with transducers for pipe sizes 15-100mm or 100 - 700mm, complete with manual and stainless steel straps.

Features:

• High accuracy. Normally, ±1%. When on-site calibration available, ±0.5%.
• Wide flow range 0.03 to 105ft/s.
• Wide pipe size range (from 1" to 240").
• Noninvasive. No pipe disturbance. No moving parts, no pressure drop.
• Easy and economical installation. No cutting pipe, non drilling hole.
• Suitable for all commonly used pipe materials
• Easy to use and set up. Self-explanatory menu programming
• Velocity, volumetric and totalized flow
• GPRS / GSM networking capability with certain model
• Ideal for both clean and opaque liquid flow measurements

Specification
Linearity	0.5%
Repeatability	0.2%
Accuracy	Normally better than ±1%. Could be ±0.5% with on-site calibration.
Response Time	0.5 Seconds
Display	Backlit LCD 2x20 Characters. Display instantaneous flow rate, accumulated flow rate (positive, negative and net rates), velocity, time, analog inputs, etc.
Units	English (U.S.) or metric
Signal Outputs	Current output: 4-20mA or 0-20mA. Impedance 0-1k
	OCT output: pulse signal for accumulated flow rate (positive, negative and net rates); frequency signal for instantaneous flow rate (0-9,999Hz selectable)
	Relay: output 20 signals, such as no signal, reverse flow & more
Signal Inputs	5 channel analog signal inputs (for signals such as temperature, pressure, liquid level, etc.)
Data Logger	Automatically record the following information: 1) The totalizer data of the last 64 days / 64 months / 64 years 2) The power time and corresponding flow rate of the last 64 times power on and off events 3) Allow manual or automatic flow loss compensation 4) The instrument working status of the last 64 days.
Computer Interface	RS232
Enclosure	Protection Class: IP65 (NEMA 4X)
Liquids	Type: Virtually all commonly used liquids (full pipe) Temperature: 32˚F - 212˚F (0˚C - 100˚C) Concentration: <10,000ppm and small air bubble concentration
Pipe	Sizes: 1" - 240" Materials: All metals, most plastics, fiber glass, etc. Pipe Length: Better longer than 15D, where D is pipe diameter. If a pump is near, the straight pipe section following the pumps should be > 30D
Cable	Shielded transducer cable. Standard length 15ft (5m). Can be extended to 1640ft (500m). Contact the manufacturer for longer cable requirement. Cable should not be laid in parallel with high-voltage power lines, neither should it be close to strong interference source such as power transformers.
Power	8 to 36VDC, 80 to 265VAC optional with PSU

Transducer Specifications
Type S1	Small size transducer (magnetic) For pipe size ½” – 4”
Type M1	Standard medium size transducer (magnetic) For pipe size 2” – 28”
Type L1	Large size transducer (magnetic) For pipe size 11” – 240”

Components / Downloads