Precision 190P Dual Mode Portable Clamp On Ultrasonic Flowmeter

Quick Overview

The world's most cost effective hand held microprocessor based clamp-on flow meter, featuring a choice of analog outputs, thickness gauge option, graphical display of data, data logger, RS232, USB, on board help, automatic speed of sound measurement and flow profile correction algorithm. Available with standard and doppler transducers for pipe sizes 15mm - 6500mm and high temperature transducers for up to 180°C.

View Options

Details

Key Benefits

Measure flow rate within a pipe without cutting the pipe.
Latest correlation signal detection system.
Measurement not dependent on fluid speed of sound.
AZW adaptive zoom windowing technology as standard.
No complicated upper velocity limits on sensors.
Built in Reynolds number correction.
Suitable for all commonly used sonically conductive pipe materials and liquids.
Extremely easy to install clamp-on sensors with no process interruption.

Specification

Hand Held Electronics
Protection Class : IP54

Material : ABS
Weight : < 1.5 Kg
Dimensions : 275 x 150 x 55mm
Display : 240 x 64 graphics LCD with backlight
Keypad : 17 key tactile membrane
Temperature range : 0ºC to +50ºC (operating) -10ºC to +50ºC (storage)
Power supply/charger Input : 12VDC
Power consumption 160mA once fully charged
Volumetric flow units : m3, gallons (Imperial and US), Litres
Velocity units : metres/sec, feet/sec
Flow velocity range : 0.01 m/sec to 25 m/sec to 4 significant figures (option higher if required)
Total volume : 12 digits forward and reverse
Continuous battery level indication
Continuous signal quality indication
ERROR messages
Analogue 4-20mA into 750 Ohms : User definable scaling
Resolution : 0.1% of full scale
Pulse 5 Volts User definable scaling
Serial RS232, USB
Data Logging memory capacity 120,000 data points
Data Logging output Via RS232 or displayed graphically/numerically
Transducer Standard X type Pipe size : 15mm-1200mm
General service temp short term :-30 to 130°C
General service temp long term :-30 to 105°C
Transducer Standard X type HT Pipe size : 15mm-1200mm
General service temp short term :-40 to 180°C
General service temp long term :-30 to 170°C
Transducer Standard Y type Pipe size : 1200mm-6500mm
General service temp short term :-30 to 130°C
General service temp long term :-30 to 105°C
Special application transducer design service is available please contact us for details.
Repeatability ±0.5% with unchanged transducer positions
Accuracy ± 1% to± 2% or ± 0.02 m/sec whichever is the greater, depending on application.
The specification assumes turbulent flow profile with Reynolds numbers above 4000

OMNI-TM-8812 Thickness Gauge.

The TM-8812 is a handheld microprocessor-controlled ultrasonic thickness gauge specifically designed to measure the thickness of metallic and non-metallic materials e.g. aluminium, titanium, plastics, ceramics, glass, plastics including rubber and other good ultrasonic wave conductors, as long as they have parallel top and bottom surfaces. This gauge can be used to determine the exact thickness of pipework to ensure the correct settings on the 190LT & 190P ultrasonic flow meter. The TM-8812 will also check a pipe for loss of thickness due to corrosion or erosion.

Availability: In stock

Price range : £2,140.00 - £3,800.00

Price as configured: £1,445.00

Heat Meter Option: Qty:
Transducer Options*: Qty:
Calibration Certificate: Qty:

* Required Fields

Price as configured: £1,445.00

Qty:

Part Builder

Description	190 Series portable, dual mode, ultrasonic, clamp-on Flow Meter. Electronics: Hand held, battery & mains powered with AZW Correlation measurement system 153 Display: Rate of flow, totalised flow, velocity. Units selectable via the keypad. Data Logger: Built-in, 120,000 flow readings. Saved as text and graph. RS232 connection to PC. Power Supply: Built-in rechargeable battery. Mains adaptor 110V/240V AC. Output: 4-20mA & pulse. Complete with: Pipe mounting kit, interconnecting cables, Manual and hard carrying case.

Description

190 Series portable, dual mode, ultrasonic, clamp-on Flow Meter. Electronics: Hand held, battery & mains powered with AZW Correlation measurement system 153 Display: Rate of flow, totalised flow, velocity. Units selectable via the keypad. Data Logger: Built-in, 120,000 flow readings. Saved as text and graph. RS232 connection to PC. Power Supply: Built-in rechargeable battery. Mains adaptor 110V/240V AC. Output: 4-20mA & pulse. Complete with: Pipe mounting kit, interconnecting cables, Manual and hard carrying case.

Heat Meter Option
Transducer Options*
Calibration Certificate
Quantity

Components / Downloads

For further information, technical advice, or a quotation please call or email us. If you are not sure which product you need one of our technical sales advisors will be happy to discuss your application. We also accept company purchase orders by fax or post. Credit card orders can also be placed over the phone for any product.

REF	DESCRIPTION	DOWNLOADS	PRICE	ORDER ITEM

190PD Dual Mode Ultrasonic Flowmeter
190PD Dual Mode Flow meter	190P Portable Dual Mode Clamp-on Ultrasonic Flow meter. Kit comprises of handheld meter, probes for pipe sizes from 15-1200mm, sensor guide rail, chains and straps, mains charger, ultrasonic couplant, manual, Aluminium flight case.	Datasheet Size: (255.45 KB) Manual Size: (379.52 KB)	£2,935.00	Not Available online
190PD-WPG-XPG-YPG	190P Portable Dual Mode Clamp-on Ultrasonic Flow meter. Kit comprises of handheld meter, probes for pipe sizes from 15-6500mm, sensor guide rail, chains and straps, mains charger, ultrasonic couplant, manual, Aluminium flight case.		£4,200.00	or call us for a quote

Ultrasonic Grease
ULTRA-COP	Non-melting hydrocarbon grease. Low contact resistance. 50ml tube. Provides a clear contact from sensor to the surface to improve the ultrasonic signal.		£9.40	or call us for a quote

TM-8812 Portable Thickness Meter
TM-8812	TM-8812 portable thickness gauge. Range: 1.2 to 225mm Resolution: 0.01mm Display: Selectable metric or imperial units. 4 Digit LCD 10mm high. Velocity: 1000 - 9000 m/s, sensor operating temperature 0-50°C, Battery: Operated 4 x AAA cells provides 20 hours continuous operation. Built in calibration test block. Suitable for thickness measurment on all metals including steel, cast iron, aluminium, copper, brass, titanium sheet metal, also glass, ceramics and hard plastics. Supplied with carry case . Accuracy ±0.5%.	Operating Manual Size: (876.66 KB) Datasheet Size: (263.58 KB)	£349.59	or call us for a quote