Omni Instruments News | www.omniinstruments.co.uk

NMEA to Modbus Converter

The SGW1-MB-NM is a NMEA to Modbus converter. The device will read incoming NMEA sentences on one of its serial ports. Then it will parse the sentence and map the values into a Modbus register. The Modbus registers can then be read with any standard Modbus master device. Features 2 RS232 ports (1 Console + 1 NMEA 0183) 1 RS485 ports (Modbus) Modbus RTU and ASCII protocols NMEA 0183 Protocol Baud rates up to 115200 bps Easy to install and set-up through a serial console Wide range power supply [ read more ]

QA-POWER-M Power Analyser

Omni Instruments introduces an all in one power monitoring solution with a built in data logger, analogue output, MODBUS and a relay for an alarm.  Suitable for a wide variety of single phase circuits with internal current range of 10A or up too 800A AC using an external CT, supports voltage ranges of 1000V DC or 600V AC. Simple configuration and downloading of the data is carried out by removing the USB memory key on the front of the unit. Measure Irms, Vrms, Watt, Var, Va, Vpk, Ipk, Frequ [ read more ]

QI Current Transducers

Omni Instruments introduces a new line of current transformers which feature two outputs, one 0-10V DC and the other MODBUS RTU.  Offering precision 0.5% accuracy with current ranges of 50 Amps and 300 Amps on AC or DC sources.  On AC lines, frequencies of 20 Hz to 1000 Hz are supported.  Protection for spikes of 2000 Amps or 300 Amps continuous, as well as 3 kV isolation. Simple installation with DIP switches and DIN rail clips, the QI series can be installed in a matter of minutes and off [ read more ]

ToughSonic Remote 14

Senix Introduces the ToughSonic REMOTE 14 ultrasonic sensor for remote liquid level applications.   Senix Corporation, manufacturer of ToughSonic® ultrasonic level and distance sensors, introduces the ToughSonic REMOTE 14, the first in a series of ultrasonic liquid level sensors designed for remote monitoring applications.   Global weather conditions require new water management solutions. As both droughts and floods become more common around the world, sophisticated water level monit [ read more ]

PS500 Multi Gas Detector

The Personal Surveyor (PS500 Series) is a robust and accurate portable gas detector that provides personal protection in confined space applications with audible and visual alarms in the event of exposure to dangerous levels of gases being detected. The PS500 unit can be fitted with any 4 of the 20 'Plug and Play' smart sensors to detect and display any combination of gases and the optional internal sampling pump allows for pre-entry checking or remote sampling. The PS500 is suitable for a wide [ read more ]

Business Matters - Motivation Qualifies Jim for Business

[ read more ]

Business Matters Article - Omni Success Measures Up.

Business Matters [ read more ]

Dundee Foodbank Donations

A big thank you to all staff who contributed to the food bank collection last year and a special thank you to Cheryl Foran for arranging the collection and taking the donation to the Dundee foodbank.    [ read more ]

AL Series Laser Level & Distance Transmitter

The AL series laser level sensors are non-contact, level measuring instruments designed for solid, granular materials or opaque liquids. The characteristic narrow beam divergence of the laser permits direct aiming to the target surface without interference from structure or falling material. The AL40 unit provides a continuous 4-20mA and single point relay outputs, which allows it to operate as a process control sensor while simultaneously providing high and low alarms. Whether measuring a few m [ read more ]

CCGBP Series - Brake Pedal Load Cell

The CCGBP load cell is a very low profile load cell designed for the measurement of brake pedal compressive forces. At just 12.5mm high, the CCGBP load cell is small enough to fit in the tightest spaces. The integral mounting and loading plate allows for fast and simple fitting directly onto the pedal, with customised mounting options available for any vehicle. Ranges 50 to 200Kg. Standard output is 2mV/V with options for inline amplifiers for standard 4-20mA or voltage outputs and handheld disp [ read more ]