Omni Instruments
contact icon+44 (0) 845 9000 601
+44 (0) 1382 443000
WE ARE HERE TO HELP

Contact our technical sales team now to discuss your requirements

help icon
MY BASKET basket arrow

£0.00

My Cart

You have no items in your shopping cart.

Click basket to edit.

Products

Latest added news blog
New MX32 Gas Detection Controller
Richard Burgess
Aug 18,2016
Designed to meet SIL1 requirements, the new MX32 from Tyco is a compact, low-profile gas dete...read more >
2261  mV - Load Cell Transmitter

2261 mV - Load Cell Transmitter

2-3 Days Del.

Quick Overview

The 2261 is a programamble load cell amplifier suitable for 4 wire bridge / strain gauge sensors. Both zero and span are programmable via the front key pad and the LED display allows easy setup.The unit also has NPN/PNP input for external taring and a regulated supply for standard transducers
View Options

Details

Features
  • Load cell amplifier
  • mV to current / voltage conversion
  • Front-programmable / LED display
  • Relative calibration of input span
  • NPN / PNP input for external taring
  • Supply for standard transducers
Common specifications:
Supply voltage.................................…24 VDC ±20%
Internal consumption ......................… 2.2 W
Max. consumption.............................. 7.2 W
Signal/noise ratio................................ Min. 60 dB
Signal dynamics, input ....................... 17 bit
Signal dynamics, output............... ...... 16 bit
Updating time..................................... 20 ms
Response time, programmable ........ ... 0.06...999 s
Calibration temperature.................. .... 20...28°C
Temperature coefficient..................  ... < ±0.01% of span / °C
Linearity error .................................... ≤±0.1% of span
Effect of supply voltage change..........   < ±0.002% of span/ %V
Auxiliary voltage:
Transducer supply.............................. 5...13 VDC
Load (max)........................................ 230 mA
EMC-Immunity influence............... ..... < ±0.5% of span
Humidity .................................. ........ < 95% RH (non-cond.)
Dimensions (HxWxD).......................... 80.5 x 35.5 x 84.5 mm
Tightness...................................  ...... IP50
Weight ............................................. 130 g


Electrical specifications - Input:
mV-input:
Measurement range ........................... -40...100 mV
Min. measurement range (span).......  .. 10 mV
Max. offset......................................... 70% of selec. max. value
Input in relation to supply gnd.........   ... > - 5 V and < +10 V
Max. cable resistance per wire.......  .... 15 Ω
Suppression of
transducer cable resistance ............... > 300
Input resistance................................. > 10 ΜΩ
Overrange.......................................... 0...999% of selected measurement range
Digital input:
NPN.................................................. Pull up 24 VDC / 6.9 mA
PNP ................................................. Pull down 0 VDC/6.9 mA
Trig level low...................................... < 6 VDC
Trig level high..................................... > 10.5 VDC
Pulse width........................................ > 30 ms

Electrical specifications - Output:

Current output:
Signal range ...................................... 0...20 mA
Min. signal range (span) ..................... 5 mA
Max. offset......................................... 50% of selec. max. value
Load (max.)................................. ...... 20 mA / 600 Ω./ 12 VDC
Load stability ..................................... < ±0.01% of span/100 .
Current limit........................................ < 23 mA
Voltage output through internal shunt:
Signal range ....................................... 0...10 VDC
Min. signal range (span) ................. .... 250 mVDC
Max. offset.......................................... 50% of selec. max. value
Load (min.).......................................... 500 kΩ
Voltage limit ....................................... < 11.5 VDC
Observed authority requirements: Standard
EMC 89/336/EEC, Emission ......   ....... EN 50 081-1, EN 50 081-2
Immunity............................................. EN 50 082-2, EN 50 082-1

Availability: Stock Item

 

Components / Downloads

For further information, technical advice, or a quotation please call or email us. If you are not sure which product you need one of our technical sales advisors will be happy to discuss your application. We also accept company purchase orders by fax or post. Credit card orders can also be placed over the phone for any product.

REF DESCRIPTION DOWNLOADS PRICE ORDER ITEM
2261
PR2261 strain gauge/load cell amplifier, input range -40 to +100mV, Output 4 - 20mA or 0 - 10V. Power supply 24vDC. Supplied with DIN rail mounting base.
View FileDatasheet
   Size: (250.15 KB)
£263.68
or call us for a quote
 
PR Accessories
7000
7000
Front panel mounting frame for system 2200 units. Dimensions 100 x 50 x 77mm (H x W xD), cut-out 83.5 x 38.5 mm (H x W). Material: Light gray glass-reinforced Noryl SE 1
£9.78
or call us for a quote
7002
7002
Stainless Steel retention clip for use with 11 point relay socket. Necessary in environments with strong vibrations.
£3.09
or call us for a quote
7023
7023
11-Pole Relay socket for coding with screw terminals. For mounting on a DIN rail or directly on the bottom plate. Dimensions (HxWxD) 68 x 38 x 24mm.
£12.36
or call us for a quote
7024
7024
Code ring and code pin for coding of the 11-pole relay socket type 7023.
£3.09
or call us for a quote