Products

Latest added news blog

MSR175 Shock Transportation Data Logger

Kenny Laidlaw

Oct 01,2018

The MSR175 shock transportation data logger is the newest miniature logger from MSR. The MSR175 ut...read more >

VIEW ALL OUR LATEST NEWS

previous product 2/26 next product

DBBSM S Beam - Bi-directional Load Cell

Quick Overview

The DBBSM series of loadcells are a miniature S beam, bi-directional load cell suitable for tension and compression applications. Loadcells are available with a bi-directional range of 1Kgf up to 30,000Kgf with a standard 2.7mV/V (2mV/V above 10,000Kgf) output and accuracy of 0.03%. Units can be supplied with suitable inline amplifiers to provide a calibrated 4-20mA output.

View Options

Details

The DBBSM series 'S-beam load cell' is designed for force measurement and weighing applications alike and can be used for tension and compression measurements. It's ease of mounting makes it very attractive for use as a general purpose load cell. The DBBSM is a miniature version of the DBB Series load cells and ideal for applications where space is limited.

Features

Capacities 1 to 30,000Kg
Robust Construction
Simple Installation
High Accuracy : <±0.03%/RC
High Side Load Resistance
3-YEAR Manufacturer Warranty
Sealed to IP51, IP67 Version available for more ardous applications

Options

Other Ranges Available on Request
Spherical Rod End Bearings
Load Buttons
Different Cable Lengths
Full Range of Mounting Options Available (consult factory)
500VAC Certification

Applications

Force & Load Measurement Applications
Suspended Hoppers
Geotechnical Test Equipment
Tensile Testing Machines
Wave Tank Monitoring (IP67 version)

Specifications

Standard Capacities (Kgf):	0-1, 0-2, 0-5, 0-10, 0-25, 0-50, 0-100, 0-250, 0-500, 0-1,000, 0-2,500, 0-5,000, 0-10,000, 0-20,000, 0-30,000
Sensitivity:	2.7mv/V Nominal (2.0m/V nominal on units above 10,000Kgf
Zero Balance/Offset:	<±1.0% Rated Output
Non-Linearity:	<±0.03% Rated Output
Hysteresis:	<±0.03% Rated Output
Repeatability:	<±0.02% Rated Output
Input Resistance:	375 Ohms Nominal
Output Resistance:	350 Ohms Nominal
Insulation Resistance:	>5000 @ 50vDC
Excitation Voltage:	10vDC Recommended (2-15vDC Acceptable)
Operating Temperature:	-20 to +80°C
Compensated Temperature:	0 to +70°C
Storage Temperature:	-20 to +80°C
Safe Overload:	150% of Rated Capacity
Ultimate Overload:	300% of Rated Capacity
Maximum Safe Side Load:	30% of Rated Capacity
IP Rating:	Standard IP51, IP67 available on request
Fatigue Life:	10⁸ Cycles Typical (10⁹ cycles on fatigue-rated version)
Cable:	3m, 4-Core Screened, PUR Sheath Ø5 nominal
Construction:	1-100Kg: Aluminium Alloy, 250-30,000Kg: Stainless Steel

Dimensions

DBBSM Dimensional Drawings

Note: Load cells with capacities over 10,000Kg will have rounded shoulders.

Capacity	H	L	W	W1	G	G1	Threads T	Weight
0-1, 0-2, 0-5, 0-10, 0-25Kgf	60	48	12.7	20	30	6.35	M8 x 1.25	85g
0-50, 0-100Kgf	70	48	18	25	35	9	M8 x 1.25	140g
0-250Kgf	70	48	18	25	35	9	M8 x 1.25	330g
0-500Kgf	75	48	30	37	37.5	15	M12 x 1.75	560g
0-1,000Kgf	75	48	30	37	37.5	15	M12 x 1.75	580g
0-2,500Kgf	90	63	38	38	45	8	M16 x 2.0	1.33Kg
0-5,000Kgf	90	63	38	38	45	8	M16 x 2.0	1.35Kg
0-10,000Kgf	145	138	55	N/A	72.5	27.5	M30 x 2.0	6.0Kg
0-20,000Kgf	190	190	75	N/A	95	37.5	M45 x 3.0	25Kg
0-30,000Kgf	190	190	75	N/A	95	37.5	M45 x 3.0	25Kg

The optional load buttons and rod end bearings are designed to align forces through the principle axis of the load cell, reducing the effects of extraneous forces. Load Buttons are used for compressive forces and Rod End Bearings are used for tensile forces.

Availability: In stock

Price range : £254.00 - £1,546.40

Price as configured: £0.00

Range*: Qty:
Cable Length*: Qty:
Options*: Qty:

* Required Fields

Price as configured: £0.00

Qty:

Part Builder

Description	DBBSM S Beam - Bi-directional load cell. Output 2.7mV/V, accuracy ±0.03%, sealed to IP51.

Range*
Cable Length*
Options*
Quantity

Components / Downloads

For further information, technical advice, or a quotation please call or email us. If you are not sure which product you need one of our technical sales advisors will be happy to discuss your application. We also accept company purchase orders by fax or post. Credit card orders can also be placed over the phone for any product.

REF	DESCRIPTION	DOWNLOADS	PRICE	ORDER ITEM
DBBSM Load Cell	DBBSM S Beam Bi-directional load cell. Ranges 1Kg to 30,000Kg, Output 2.7mV/V (2mV/V above 10,000Kgf) , accuracy 0.03%. Load cells below 100Kg are constructed for Aluminium Alloy, others are Stainless Steel, all with a IP51 rating.	Datasheet - Load Cell Size: (478.27 KB) Datasheet - Mountings Size: (108.6 KB) Datasheet - Amplifier Size: (241.07 KB)	£254.00	Not Available online

Rod End Bearings - Male Thread
RODENDM8X1.25	Rod End Bearing to align extraneous forces through the principle axis of a load cell. M8 x 1.25 Male Right-hand Thread Construction: Hard Chromium/PTFE composite/Elgoglide sliding contact surface, with Zinc plating for corrosion resistance. Rod Eye 8mm diameter. Designation: GAR8 UK		£36.00	or call us for a quote
RODENDM12X1.75	Rod End Bearing to align extraneous forces through the principle axis of a load cell. M12 x 1.75 Male Right-hand Thread Construction: Hard Chromium/PTFE composite/Elgoglide sliding contact surface, with Zinc plating for corrosion resistance. Rod Eye 12mm diameter. Designation: GAR12 UK	Datasheet Size: (111.01 KB)	£40.00	or call us for a quote
RODENDM16X2.0	Rod End Bearing to align extraneous forces through the principle axis of a load cell. M16 x 2.0 Male Right-hand Thread Construction: Hard Chromium/PTFE composite/Elgoglide sliding contact surface, with Zinc plating for corrosion resistance. Rod Eye 17mm diameter. Designation: GAR17 UK		£50.00	or call us for a quote
RODENDM30X2.0	Rod End Bearing to align extraneous forces through the principle axis of a load cell. M30 x 2.0 Male Right-hand Thread Construction: Hard Chromium/PTFE composite/Elgoglide sliding contact surface, with Zinc plating for corrosion resistance. Rod Eye 30mm diameter. Designation: GAR30 UK		£106.00	or call us for a quote
RODENDM45X3.0	Rod End Bearing to align extraneous forces through the principle axis of a load cell. M45 x 3.0 Male Right-hand Thread Construction: Hard Chromium/PTFE composite/Elgoglide sliding contact surface, with Zinc plating for corrosion resistance. Rod Eye 50mm diameter. Designation: GAR50 UK-2RS		£453.00	or call us for a quote

Load Buttons
LOADBUTM8X1.25	Load Buttons are used to align extraneous forces through the principle axis of a load cell. Stainless Steel construction: Dimensions: 15mm Diameter, 5mm Button and M8 x 1.25 Male Right-hand Thread, 10mm thread length.		£66.00	or call us for a quote
LOADBUTM12X1.75	Load Buttons are used to align extraneous forces through the principle axis of a load cell. Stainless Steel construction: Dimensions: 22mm Diameter, 6mm Button and M12 x 1.75 Male Right-hand Thread, 12mm thread length.		£77.00	or call us for a quote
LOADBUTM16X2.0	Load Buttons are used to align extraneous forces through the principle axis of a load cell. Stainless Steel construction: Dimensions: 32mm Diameter, 10mm Button and M16 x 2.0 Male Right-hand Thread, 16mm thread length.		£77.00	or call us for a quote
LOADBUTM30X2.0	Load Buttons are used to align extraneous forces through the principle axis of a load cell. Stainless Steel construction: Dimensions: 50mm Diameter, 20mm Button and M30 x 2.0 Male Right-hand Thread, 40mm thread length.		£106.00	or call us for a quote
LOADBUTM45X3.0	Load Buttons are used to align extraneous forces through the principle axis of a load cell. Stainless Steel construction: Dimensions: 70mm Diameter, 40mm Button and M45 x 3.0 Male Right-hand Thread, 60mm thread length.		£421.00	or call us for a quote

TRX Handheld Portable Load Cell Indicator
TRX	Microprocessor-Based Portable Handheld Display for All Types of Strain Gauge Sensors. 2 x AA Battery, or USB Powered with Sensitivity Ranges from 0.5mV/V up to ±480mV/V. The TRX option to use the TRX calibration ranges, or to ignore the TEDS data and us manually entered sensitivity ranges. 128 x 64 monochrome dot matrix display with backlight. The display will change depending on the mode and options you have enabled.	Datasheet Size: (489.18 KB)	£368.00	or call us for a quote

TR150 Handheld Portable Load Cell Indicator
TR150	Handheld Portable Load Cell Indicator. The TR150 is a high resolution digital load cell meter designed to work with all types of load cell and strain gauge based transducer. 7-digit LCD display, peak & trough capture, display update rates up to 25Hz, display hold/freeze and shunt calibration. Load Cell Display is housed in a robust IP65 enclosure with 2 x AA batteries to provide up to 450 hours operation.	Datasheet Size: (268.49 KB) Operating Manual Size: (562.15 KB)	£308.00	or call us for a quote

TR150 Protective Case
TR150-CASE	Protective Black Leather Case for TR150 handheld display. The TR150 leather carry case allows full operation of the indicator whilst fitted.		£35.00	or call us for a quote

TR150 Connector
TR150-CONNECTOR	Connector for the TR150 Handheld Display.		£30.00	or call us for a quote

DSC-USB Load Cell Digitiser Module
DSC-USB	DSC-USB Load Cell Digitiser Module. The DSC-USB is a USB load cell interface designed to convert load cell inputs into a digital USB Serial output, 100 samples per second. It is housed in a rugged plastic enclosure (71 x 51 x 20mm) rated to IP50 with a D9 connector and female micro USB connector. The DSC-USB draws power directly from the PC interface and units are supplied with DSCUSB to USB converter tool kit software and USB to micro USB cable, 1.5m.	Datasheet Size: (599.99 KB)	£302.00	or call us for a quote