Omni Instruments
contact icon+44 (0) 845 9000 601
+44 (0) 1382 443000
WE ARE HERE TO HELP

Contact our technical sales team now to discuss your requirements

help icon
MY BASKET basket arrow

£0.00

My Cart

You have no items in your shopping cart.

Click basket to edit.

Products

Latest added news blog
CDI5450 Hot Tap Compressed Air Flow Meter
Kenny Laidlaw
Jun 14,2017
The CDI 5450 is a hot tap compressed air flow meter is a modified version of the 5400 compressed air...read more >
APCI-3110 Multifunction board

APCI-3110 Multifunction board

1 Week Del.

Quick Overview

Multifunction board, optically isolated, 16 SE/8 diff. inputs, 4 analog output, 12-bit with extensive software and hardware functionalities: PCI-DMA, Auto Refresh, high throughput rate 200 kHz,
View Options

Details

The  APCI-3110 is a 12-bit multifunction board for 3.3 V and 5 V PCI systems, with optical isolation up to 1000 V and a high throughput rate of 200 kHz. The PCI board has additional types of conversion: Sequence RAM, Auto Refresh, scan, timer or external event.

Furthermore, the board has a PCI DMA, 2 watchdogs, 4 digital inputs and 4 digital outputs. Sensors, which allow to supply current signals instead of voltage signals, also can be acquired with the APCI-3010, as this board offers up to 16 current inputs. The board is protected against overvoltage and input filter and it is protected against high frequency emission. With the free calibration tool you can do the fine adjustment on-site.

Features

Analog inputs

  • 16/8 SE or 8/4 diff. inputs, optically isolated
  • Resolution: 12-bit (APCI-3110) or 16-bit (APCI-3116)
  • Throughput: 200 kHz
  • Input voltage: 0-10 V, ±10 V, 0-5 V, ±5 V, 0-2 V, ±2 V, 0-1 V, ±1 V, 0-20 mA (option), freely programmable through software for each channel
  • Current inputs: 0-20mA (Option) can be combined freely with voltage inputs
  • Gain PGA x1, x2, x5, x10 freely programmable through software for each channel

Analog acquisition

  • Different input modes: Simple mode;Scan modes; Sequence modes; Auto Refresh mode
  • Onboard FIFO (for 512 analog values)
  • PCI-DMA for analog data acquisition

Analog outputs

  • 4 analog outputs, optically isolated
  • 12-bit resolution
  • Setup time 15 μs typ
  • Output voltage after reset: 0 V
  • Each output has its own ground line (without optical isolation)
  • Output voltage range: -10 V up to + 10 V
  • Output current: ± 5 mA
  • Short-circuit current: ± 20 mA

24 V digital I/O

  • 24 V digital I/O enable a high interference distance and a long distance between signal transmitter and data acquisition
  • 4 digital inputs, 24 V, optically isolated
  • 4 digital outputs, 24 V, optically isolated

TTL I/O

  • 24 digital TTL inputs/outputs
  • Port1: inputs / Port2: outputs / Port3: I/O
  • All I/O are at 5 V through pull-up resistors
  • Easy programming through I/O read and write commands

Timer/counter

  • 3 / 3, 16-bit
Watchdog
  • 2, 16-bit
Safety features
  • Optical isolation 1000 V min.
  • Creeping distance IEC 61010-1
  • Circuit part of the analog acquisition is separated from the circuit part of the digital function
  • Overvoltage protection ± 40 V
  • Protection against high-frequency EMI
  • Input filters
  • Noise neutralisation of the PC supply
  • Connection of the I/O signals through robust industry standard SUB-D connector
Applications
  • Industrial process control
  • Industrial measurement and monitoring
  • Multichannel data acquisition
  • Control of chemical processes
  • Factory automation
  • Acquisition of sensor data
  • Laboratory equipment
  • Current measurement
  • Instrumentation
Specifications

Analog inputs
Number of inputs: 16/8 SE or 8/4 differential inputs
Resolution: 12-bit (APCI-3110) or 16-bit (APCI-3116)
Optical isolation: 1000 V through opto-couplers from PC to peripheral
Input ranges: Software-programmable for each channel 0-10 V, ±10 V, 0-5 V, ± 5 V, 0-2 V, ± 2 V, 0-1 V, ± 1 V, 0-20 mA optional
Gain: Software programmable (x1, x2, x5, x10)
Throughput: 200 kHz
Trigger: through software, timer, external event (24 V input)
Data transfer: Data to the PC through FIFO memory, Interrupt at EOC (End Of Conversion), DMA transfer at EOC
Interrupts: End of conversion, at timer overrun, End of scan

Analog outputs
Number of outputs: 4
Optical isolation: 1000 V through opto-couplers
Resolution: 12-bit

Voltage outputs
Output range: - 10 V to + 10 V (- 1 LSB)
LSB: 4.8828 mV
Accuracy: 11-bit
Time to Ready: typ. 4.5 μs
Setup time: typ 15 μs (at 10 V step)
Max. output current: ± 5 mA
Short-circuit current: ± 20 mA
Output voltage after reset: 0 V

Digital I/O
Number of I/O channels: 4 digital inputs, 24 V. 4 digital outputs, 24 V
Logical “0” level: 0-14 V
Logical “1” level: 19-30 V
Optical isolation: 1000 V through opto-couplers from PC to peripheral

TTL I/O
Number of TTL I/O channels: 24
I/O Address range: 128 Byte, addressing : 32-bit
Programming: Through write/read commands

Physical and environmental conditions

Dimensions: 175 x 99 mm
System bus: PCI 32-bit 3.3/5V acc. to spec. 2.2 (PCISiG)
Space required: 1 PCI slot for analog I/O, 1 slot opening for digital I/O with FB8001
Operating voltage: +5 V, ±5 % from the PC
Front connector: 37-pin SUB-D male connector
Additional connector : 50-pin male connector for connecting the dig. I/O
Temperature range: 0 to 60 °C (with forced cooling

Availability: Stock Item

 

Components / Downloads

For further information, technical advice, or a quotation please call or email us. If you are not sure which product you need one of our technical sales advisors will be happy to discuss your application. We also accept company purchase orders by fax or post. Credit card orders can also be placed over the phone for any product.

REF DESCRIPTION DOWNLOADS PRICE ORDER ITEM
 
APCI-3110 Analog Input Boards
APCI-3110-16
APCI-3110-16
APCI-3110 Analog Input Board. 16 single-ended or 8 differential optically isolated Inputs, 4 analog outputs. 12 Bit resolution, 24V, 4 digital inputs & 4 digital outputs, 24 TTL I/O. Timer / Counter / Watchdog.
View FileDatasheet
   Size: (615.9 KB)
£1,041.63
or call us for a quote
APCI-3110-8
APCI-3110-8
APCI-3110 Analog Input Board. 8 single-ended or 4 differential optically isolated Inputs, 4 analog outputs. 12 Bit resolution, 24V, 4 digital inputs & 4 digital outputs, 24 TTL I/O. Timer / Counter / Watchdog.
£895.05
or call us for a quote
 
Screw Terminal Panels
PX901-A
PX901-A
Screw terminal panel with transorb diodes for connecting the analog inputs
View FileDatasheet
   Size: (268.94 KB)
£111.12
or call us for a quote
PX901-AG
PX901-AG
Screw terminal panel with transorb diodes with screws with housing for DIN rail for connecting the analog inputs
£143.40
or call us for a quote
PX8001
PX8001
Screw terminal panel with housing for DIN-rail mounting, 3 rows, 50-pins for the connection of 50 signal lines
£105.66
or call us for a quote
 
BNC Connector Box
PX-BNC
PX-BNC
PX-BNC Connection Box. Allows the direct connection of analog voltage and current signals through BNC connectors.The black painted Aluminium housing and clamps allows for DIN Rail mounting. The box connects to the APCI board via a 37-pin SUB-D female connector, available separately.
View FileDatasheet
   Size: (208.13 KB)
£302.24
or call us for a quote
 
Connection Cables
ST010
ST010
Standard Shielded Round Cable. 37-pin SUB-D female connector / 37-pin SUB-D male connector, twisted-pair conductors. 2m cable length.
£86.66
or call us for a quote
ST011
ST011
Standard Shielded Round Cable. 37-pin SUB-D female connector / 37-pin SUB-D male connector, twisted-pair conductors. 5m cable length.
£89.65
or call us for a quote
ST370-16
Shielded round connection cable, 2m length for 50-pin female connector to 50-pin male connector. Various cable lengths and 90° bent connectors versions available on request.
£108.84
or call us for a quote
FB8001
Ribbon cable between OPMF and 50-pin SUB-D male connector.
£50.25
or call us for a quote