Power Supplies

The DR-30 is a DIN Rail mounted mains power supply unit with a wide 100-240 VAC input range. Unit provides a 12vDC output voltage at 2A. This provides an energy supply for bigger installations with many, or higher demand devices.

The FTR switch mode power supply provides a fixed stabilised output of 24vDC with a maximum power output of 3 Watts from a 85-250vAC power supply. The FTR power supply provides an isolated power supply and is suitable for powering instruments such as 4-20mA field transmitters and other devices requiring a 24vDC power supply. The FTR power supply is designed for DIN Rail mounting and wiring via screw terminals. This power supply is ideal for low power installations with a maximum current of 125mA.

DIN Rail mounted mains power supply unit, wide 85-264 VAC input range. Unit provides a 24vDC output voltage at 1250mA.

DIN Rail mounted mains power supply unit, wide 115-230 VAC input range. Unit provides a 24vDC output voltage at 5A.

The DR-60 Series power supply is a direct replacement for the FTR-60. The DR-60 is a DIN Rail mounted mains power supply unit with a wide 100-240 VAC input range. Unit provides a 24vDC output voltage at 2.5A. This provides an energy supply for bigger installations with many, or higher demand devices.

The PR 2220 switch mode power supply provides a fixed stabilised output variable between 5 and 24vDC with a maximum power output of 7 Watts from a 24vAC to 230vAC power supply. The PR 2220 power supply includes a 3.75kVAC isolation, plus short-circuit and thermal overload protection. A standard 11-pole relay socket allows DIN Rail mounting and also wiring via screw terminals. This power supply is suitable for PELV/SELV applications.

The PR 2222 switch mode power supply provides a fixed stabilised output of 15vDC or 24vDC (±5% using internal potentiometer) with a maximum power output of 48 Watts from a 115 or 230vAC power supply. The PR 2222 power supply includes a 3.75kVAC isolation, plus short-circuit and thermal overload protection. A standard 11-pole relay socket allows DIN Rail mounting and also wiring via screw terminals. This power supply is suitable for PELV/SELV applications.

The PR 5104 can be used as a power supply and signal isolator for 2-wire transmitters or as a signal isolator or repeater for a variety of standard industrial analogue input signals. The PR 5104A is available for safe area use as a single or dual channel device, whilst the PR 5104B is suitable for use in hazardous areas. Programming is done using internal DIP switches using any one of the 20 factory calibrated measurement ranges. DIN Rail mounted with wiring via screw terminals. The PR 5104 includes 3.75kVAC isolation and is suitable for PELV/SELV applications.

Hazardous Area Approved

The SD-15X are single output panel-mount isolated DC/DC Converter Modules supplied in a well ventilated metal casing. This DC to DC converter can be used to converter a 9-72vDC power supply to a 5vDC, 12vDC or 24vDC power supply. Ideal applications are for converting a 12V solar panel, battery bank or alternator power supplies to a 24vDC power supply. Units can also be used to provide a stable regulated supply from an unregulated supply. Max output is 15W with short circuit, overload and over-voltage protection.

We have a range of DC to DC converter modules, designed to power sensors requiring a 5vDC, 12vDC or 24vDC stabilised supply, where only a nominal 12vDC or 24vDC supply is available